Mit-ivy alamanuia uʻamea Advanced Acrylic Latex Faamau faʻamaufaʻailogaina ma sili ona ofi mana
Talosaga
E i ai sili lelei pipiʻi i uʻamea substrates ma tutusa vai-faʻavae primers, ma sili atu tino faʻaletino ma masini meatotino pe a uma le vali galu mago.
5. O le ata ata e sili ona lelei le faʻasaoina o moli ma le faʻasaoina o lanu pe a maeʻa ona faʻamago.
Fautuaina le talosaga E talafeagai mo le faʻaaluina o alavai puipuiga o loli, masini vaega, malamalama mea faigaluega alamanuia, ma isi mea maualuga puipuiga e manaʻomia.
Faamatalaga faʻapitoa e lanu eseese
Luga matutu (50% miscibility) 15 ℃ C <1h ； 25'C <0.5h
Mautu mago (50% sūsū) 15'C <48h; 25 ° C <24h
Hits "kg.cm" 50
Vai (50 ± 5μm) 72h vali ata e le pisia, e le fesoasoani pa'ū, e le ele.
Faigata 0.3 (faʻalua pendulum) masini faʻataʻitaʻiga suʻega tifaga mafiafia (23 ± 3jμm)
Adhesion (Hegelian) Laasaga 1
Luga togafitiga O le pito i luga o le coated mea e tatau ona saoloto o susu, suauʻu, acid carbon ma lefulefu.
Faamatalaga vave
Uamea ma le paʻu oxide: Fanaina blasting poʻo oneone blasting metotia e pei o le gaosiga i le Sa2.5 tulaga, lea e le mafai ona faia oneone blasting tatau ona masini faʻamamaina poʻo
Fofoina vailaʻau e aveʻese uma opeopea tauʻau gagau.
Uamea e aunoa ma le paʻu oxide: sandblasted (shotblasted) i le Sa2.5 poʻo le ea-faʻagaoioia, eletise masini olo i St3.
Ueloina, afi-tipiina poʻo firework faʻasaʻoga o mu mu nofoaga: olo i St3 tulaga.
Faʻavae mea ma tuai ata vali: aveʻese lemu tuai vali fasimea ma le ele, ma oneone i St3 ma le ea poʻo le eletise sanding meafaigaluega.
Masani atavali afifi mafai ona faʻaaogaina ma H902 vai-faʻavae primer, pe faʻaaogaina toatasi o se lautele teuteuga topcoat, pe faʻaaogaina ma isi ituaiga o primer oloa (manaʻomia e faʻafetauiina mo le faʻamaonia).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
